| REF |
PART # |
DESCRIPTION |
| 1 |
RA0-1161 |
Front guide assembly - Ribbed
plastic piece that runs the width of the printer - Mounts to the
front of the left and right side plates |
| 2 |
RA0-1173 |
Mounting support - Metal piece that
supports the paper pickup solenoid (SL001) - Mounts on the right
side plate |
| 3 |
RA0-1185 |
Left side fuser bracket (L-shaped) -
Provides mounting support for the fusing assembly - Mounts to the
upper rear corner of the left side plate |
| 4 |
RA0-1186 |
Right side fuser bracket (L-shaped)
- Provides mounting support for the fusing assembly - Mounts to
the upper rear corner of the right side plate |
| 5 |
RH7-5315 |
24V DC Solenoid - Engages the pickup
roller gear/clutch assembly - Mounts on the right side plate
assembly |
| 6 |
RA0-1176 |
69 tooth gear - Large gear with ribs
and six small holes - Mounts on on a rod in the upper rear corner
of the right side plate |
| 7 |
RA0-1023 |
Connecting link - Connects between
the sliding linkage on the left and right side plates and the
toner cartridge access door (two used) |
| 8 |
RG0-1083 |
Right side plate assembly - Includes
the right side plate, drive motor, most all drive gears, and cam
levers - Does not come with the pickup roller solenoid or 69 tooth
gear |
| 9 |
RH7-1505 |
Stepper motor assembly - Drives all
rollers and fusing assembly via the gear train on the right side
plate - Mounts on the inside rear of the right side plate |
| 10 |
RA0-1197 |
Rubber foot |
| 11 |
RG0-1084 |
Left side plate assembly - Internal
metal plate that the connector PC board mounts to |
| 12 |
RG9-1494 |
Fusing assembly ((For 220V to 240V
operation) - Bonds the toner to the paper with heat - Mounts in
the upper rear of the printer |