HP LaserJet 1200
Internal Components (1
of 2) Diagram
| REF | DESCRIPTION | |
|---|---|---|
| Guide - For the shutter lever on the laser/scanner assembly - Mounts on the metal support bracket for the laser/scanner assembly | ||
| Shutter lever - Spring loaded lever - Mounts to the top of the laser/scanner assembly | ||
| Compression spring - Provides tension for the shutter lever - Mounts between the shutter lever and the laser/scanner assembly | ||
| Laser/scanner assembly - Mounts on top of the print structure frame | ||
| Cable assembly with ferrite - 4-pin (F) connector on both ends - 35.7cm (14.1in) long - From laser/scanner assembly to formatter board | ||
| Gear/clutch assembly - Includes two gear bodies and internal spring - Mounts on the right end of the paper pickup shaft | ||
| Right side cover mounting support - Front cover support - Mounts on the upper right corner of the right side plate | ||
| Paper pickup roller (D-shaped roller) - Picks up media from the paper input tray - Clips in the holder on the paper pickup shaft | ||
| 17 tooth gear assembly - Includes the 17 tooth gear mounted on a black plastic lever/bracket - Mounts to the right side plate | ||
| Transfer roller assembly - Transfers static charge to the media being printed on - Mounts in the top rear of the paper pickup assembly | ||
| Control panel assembly - Includes the control button and indicator LED's mounted on the left front cover support - Mounts on the upper left corner of the left side plate | ||
| Flex cable - Has two 10-pin (M) edge connectors - 11.4cm (4.5in) long - From laser/scanner assembly to formatter board | ||
| Formatter PC board - Includes connectors for the USB and parallel ports, and optional copier/scanner - Mounts on the left side plate | ||
| RFI shield - Metal plate that covers the formatter board - Mounts on the left side plate |