| REF |
PART # |
DESCRIPTION |
| 1 |
RG0-1022 |
Front guide assembly -
Ribbed plastic piece that runs the width of the printer -
Mounts to the front of the left and right side plates |
| 2 |
RG0-1030 |
Fan and airflow guide
assembly - Mounts to the upper front on the right side
plate |
| 3 |
RA0-1173 |
Mounting support - Metal
piece that supports the paper pickup solenoid (SL001) -
Mounts on the right side plate |
| 4 |
RA0-1175 |
Tension spring - Provides
tension for lever - Mounts on the lower front on the right
side plate |
| 5 |
RA0-1185 |
Left side fuser bracket
(L-shaped) - Provides mounting support for the fusing
assembly - Mounts to the upper rear corner of the left
side plate |
| 6 |
RA0-1186 |
Right side fuser bracket
(L-shaped) - Provides mounting support for the fusing
assembly - Mounts to the upper rear corner of the right
side plate |
| 7 |
RH7-5284 |
24V DC Solenoid - Engages
the pickup roller gear/clutch assembly - Mounts on the
right side plate |
| 8 |
RA0-1176 |
69 tooth gear - Large gear
with ribs and six small holes - Mounts on on a rod in the
upper rear corner of the right side plate |
| 9 |
RA0-1023 |
Connecting link - Connects
between the sliding linkage on the left and right side
plates and the toner cartridge access door (two used) |
| 10 |
RG0-1001 |
Right side plate assembly -
Includes the right side plate, drive motor, most all drive
gears, and cam levers - Does not come with the pickup
roller solenoid or 69 tooth gear |
| 11 |
RH7-1473 |
Stepper motor assembly -
Drives all rollers and fusing assembly via the gear train
on the right side plate - Mounts on the inside rear of the
right side plate |
| 12 |
RA0-1197 |
Rubber foot |
| 13 |
RG0-1002 |
Left plate assembly - Left
side of internal printer mechanism - Plate that the
formatter PC board mounts to |
| 14 |
RG9-1494 |
Fusing assembly ((For 220V
to 240V operation) - Bonds the toner to the paper with
heat - Mounts in the upper rear of the printer |
