HP LaserJet 1300
Internal Components (2
of 2) Diagram
| REF | DESCRIPTION | |
|---|---|---|
| Fusing assembly - Bonds toner to paper with heat (For 100V to 127V operation) - Mounts in the upper rear of the printer | ||
| Fusing assembly - Bonds toner to paper with heat (For 220V to 240V operation) - Mounts in the upper rear of the printer | ||
| 29 tooth gear - Mounts on the end of the pressure roller - Largest of the three gears on the fusing assembly | ||
| Right side fuser bracket (L-shaped) - Provides mounting support for the fusing assembly - Mounts to the upper rear corner of the right side plate | ||
| 69 tooth gear - Large gear with ribs and six small holes - Mounts on on a rod in the upper rear corner of the right side plate | ||
| Fan and airflow guide assembly - Mounts to the upper front on the right side plate assembly | ||
| 24V DC Solenoid - Engages the pickup roller gear/clutch assembly - Mounts on the right side plate assembly | ||
| Right side plate assembly - Includes the right side plate, drive motor, most all drive gears, and cam levers - Does not come with the pickup roller solenoid or 69 tooth gear - Right side of the internal printer mechanism | ||
| Front guide assembly - Ribbed plastic piece that runs the width of the printer - Mounts to the front of the left and right side plates | ||
| Connecting link - Connects between the sliding linkage on the left and right side plates and the toner cartridge access door (two used) | ||
| Left plate assembly - Left side of internal printer mechanism - Plate that the formatter PC board mounts to | ||
| Left side fuser bracket (L-shaped) - Provides mounting support for the fusing assembly - Mounts to the upper rear corner of the left side plate | ||
| Formatter PC board assembly - Mounts to the left side frame assembly | ||
| RFI shield - Metal plate that covers the formatter PC board |