HP LaserJet 2200
250 Sheet Feeder
Internal Components Diagram
| REF | DESCRIPTION | |
|---|---|---|
| Pickup roller assembly - Black and white 'D' shaped pickup roller with a slot in the end of the shaft - 250 sheet feeder - Located near middle-front of tray | ||
| Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller - Two used | ||
| Shaft bushing/retainer - Right side pickup roller support bushing - Pickup roller right side support bushing | ||
| Shaft bushing/retainer - Left side pickup roller support bushing - Pickup roller left side support bushing | ||
| Paper sensor lever - Mechanical link to Photo sensor PS2001 | ||
| Sensor PC board - Small board with flag activated photo sensor - Photo sensor (PS3208) - Top of rage registration sensor | ||
| Sensor cable - From photo sensor PS2001 to 250 sheet feeder drive PC board - J2110 to J2003 | ||
| Feed drive assembly connector - Electrical connection between 500 sheet tray and printer | ||
| Relay cable - One connector to two connectors - Six wires - From feed drive controller board to feed drive relay | ||
| Frame ground cable - Ground connection to feed drive housing - Round crimp lug to push-on connector with green wire | ||
| Bushing spring - Provides tension for right side feed roller support bushing - For 500 sheet tray | ||
| Roller bushing - Left side feed roller bushing - Roller bushing - 500 sheet tray left side feed roller bushing | ||
| Roller bushing - Right side feed roller bushing - Roller bushing - 250 sheet tray right side feed roller bushing | ||
| Feed roller - Tray 3 feed roller - 250 sheet tray feed roller | ||
| Drive gear - 15 tooth - 15 tooth drive gear - Drives 500 Sheet tray feed roller | ||
| Tray 3 controller board - Paper feed drive PCA - 250 Tray Controller Board - Paper Feed Drive PCA |