HP LaserJet 2200
500 Sheet Feeder (2 of
2) Diagram
| REF | DESCRIPTION | |
|---|---|---|
| Pickup roller assembly - Rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers - Tray 2 roller located near front middle of tray - Roller has slotted shaft | ||
| Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller - Two used | ||
| Shaft bushing/retainer - Right side pickup roller support bushing - Pickup roller right side support bushing | ||
| Shaft bushing/retainer - Left side pickup roller support bushing - Pickup roller left side support bushing | ||
| Bushing spring - Provides tension for right side feed roller support bushing - For 500 sheet tray | ||
| Flag activated photo sensor - Photo sensor - Paper sensor PS1305 | ||
| Feed drive assembly connector - Electrical connection between 500 sheet tray and printer | ||
| Relay cable - One connector to two connectors - Six wires - From feed drive controller board to feed drive relay | ||
| Frame ground cable - Ground connection to feed drive housing - Round crimp lug to push-on connector with green wire | ||
| Roller bushing - Left side feed roller bushing - Roller bushing - 500 sheet tray left side feed roller bushing | ||
| Drive gear - 15 tooth - 15 tooth drive gear - Drives 500 Sheet tray feed roller |