HP Color LaserJet 2820
| 2830 | 2840 All-In-One Series Printers
Fusing Assembly Diagram
Fusing Assembly Diagram
| REF | DESCRIPTION | |
|---|---|---|
| Bushing - Plastic 'U' shaped bushing - Mounts on the right end of the pressure roller in the fusing assembly | ||
| Bushing - Flanged plastic bushing - Mounts on the left end of the pressure roller in the fusing assembly | ||
| Right side lock release lever - Part of locking system used to secure the fusing assembly in the printer | ||
| Left side lock release lever - Part of locking system used to secure the fusing assembly in the printer | ||
| Paper inlet guide - Small ribbed plastic piece - Mounts on the lower front of the fusing assembly | ||
| Pressure plate - Small steel channel shaped plate - Spring loaded plate that provides upward force on the pressure roller (two used) | ||
| 'Caution: High temperature' label - Mounts in a recess on the upper cover of the fusing assembly | ||
| Pressure roller assembly - Hard rubber roller on a metal drive shaft - Lower roller in the fusing assembly | ||
| M3 pan-head Phillips screw with flat washer - 8mm long - Used to secure the fusing connector holder to the base pan assembly and the fusing assembly upper cover to the structure | ||
| Base plate - Bottom support plate for the fusing assembly | ||
| Compression spring - Provides upward force on the pressure roller - Mounts between the two guide plates and the fuser support frame assembly (two used) | ||
| 30 tooth gear - Main drive gear for the fusing assembly - Mounts on the end of the pressure roller drive shaft | ||
| Cable clamp - White plastic clamp with mounting pin - Mounts on the upper right side of the front frame assembly, the lower left side of the middle frame assembly, and the lower middle of the fusing assembly (three used) | ||
| Fusing film assembly (for 110VAC to 127VAC operation) - Includes the heater assembly and the fusing film tube | ||
| Fusing film assembly (for 220VAC to 240VAC operation) - Includes the heater assembly and the fusing film tube | ||
| Pinch-roller - Small roller mounted on a shaft - Rolls against the paper delivery roller in the fusing assembly - Snaps in molded-in holders on the separation upper guide assembly (two used) | ||
| Separation upper guide assembly - Ribbed plastic channel with pivot pins on each end and two pinch rollers for the paper delivery roller - Mounts just behind the pressure roller in the fusing assembly | ||
| Right pressure release lever - To release pressure between the pressure roller and the heater assembly to clear paper jams - Mounts on the right side of the fuser support frame assembly | ||
| Rear cover / face-up output tray (ONLY) - When opened, routes printed pages to this cover/tray for face-up output - Mounts to the lower rear cover on the fusing assembly | ||
| Rear cover / face-up output tray assembly - Includes the tray/cover and the lower fusing assembly cover - When opened, routes printed pages to this cover/tray for face-up output - Mounts to the rear of the fusing assembly | ||
| Lower guide assembly - Includes the support structure, delivery roller, drive gear, paper photo-sensor, sensor flags, and upper separation guide - Mounts on the rear of the fuser support frame assembly | ||
| Left pressure release lever - To release pressure between the pressure roller and the heater assembly to clear paper jams - Mounts on the left side of the fuser support frame assembly | ||
| Grounding spring - Mounts between the fusing assembly lower rear cover and fuser support frame assembly (two used) | ||
| Gear holder - Hollow tube with locking tab - Retains the idler gear on the right side of the fusing assembly | ||
| Fusing assembly upper cover - Ribbed cover with end caps - Mounts to the top of the fusing assembly | ||
| Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever - Used to secure the fusing assembly in the printer (two used) | ||
| Fusing assembly cable (for 110VAC to 127VAC operation) - Connects the fusing heater assembly and the paper sensor to the fusing assembly connector | ||
| Fusing assembly cable (for 220VAC to 240VAC operation) - Connects the fusing heater assembly and the paper sensor to the fusing assembly connector | ||
| 28 tooth idler gear - Mounts to the upper right side of the fusing assembly | ||
| M3 pan-head Phillips screw with machine threads - 8mm long - Used to secure the thermistor to the right side plate and the power supply PC boards and holders the the base pan assembly and the ground terminal to the fuser support frame | ||
| Right spacer - Shipping lock for the fusing assembly - Mounts in the lower rear cover of the fusing assembly | ||
| Left spacer - Shipping lock for the fusing assembly - Mounts in the lower rear cover of the fusing assembly | ||
| Fusing assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 110V to 127VAC operation - Slides in the lower rear of the print engine | ||
| Fusing assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 220V to 240VAC operation - Slides in the lower rear of the print engine |