HP Color LaserJet 2820
| 2830 | 2840 All-In-One Printer Series
External Covers Diagrams
External Covers Diagrams
| REF | DESCRIPTION | |
|---|---|---|
| Upper rear cover assembly - Also guides the paper from the fusing assembly to the top output (face down) tray - Mounts on the upper rear of the printer mechanism | ||
| Right link mount kit - Includes the 'L' shaped plastic piece that has a recess for the printer-to-scanner link and scanner hinge, and the scanner release lift spring - Mounts on the upper rear right side of the print mechanism | ||
| Torsion spring - Mounts on the right link mount of the printer - Provides upward pressure to help lift up the scanner assembly when the scanner is unlatched | ||
| Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open - Mounts on the lower right side of the cartridge access door | ||
| Cartridge access door (ONLY) - Provides access to the toner cartridges and imaging drum/transfer assembly cartridge - Does NOT include the upper front cover - Mounts to the top rear cover | ||
| Face-down paper output cover ('L' shaped plastic) - Serves as the rear of the tray for the face-down output on top of the printer - Mounts under the top rear cover assembly | ||
| Memory access door - Provides access for changing or adding DIMM memory modules to the printer - Mounts to the right side cover | ||
| Left scanner link assembly - Spring loaded arm - Connects between the top of the printer and the bottom of the scanner - Allows for limited tilting of the scanner assembly for toner cartridges and image drum/transfer assembly cartridge access | ||
| Power switch rod kit - Includes the power switch push rod, compression spring, and mount retainer - Mounts on the inside of the left cover assembly | ||
| Compression spring - Provides tension for the power switch button - Mounts on the left side cover | ||
| Power switch rod kit - Includes the power switch push rod, compression spring, and mount retainer - Mounts on the inside of the left cover assembly | ||
| Power switch rod - Goes between the power button and the power switch on the low voltage power supply board - Mounts on the left side cover | ||
| Left side cover (ONLY) - Does NOT include the vent cover or power switch button - Mounts on the left side of the printer | ||
| Vent cover - Rectangular plastic cover with molded-in ventilation louvers - Mounts on the left side cover | ||
| Power switch rod kit - Includes the power switch push rod, compression spring, and mount retainer - Mounts on the inside of the left cover assembly | ||
| Mount retainer - Holds the spring loaded power switch rod on the left side cover | ||
| Right side cover assembly - Includes the right side cover, DIMM memory access door, and the formatter grounding plate | ||
| Upper left cover - Small cover that is part of the inner side wall in the cartridge access area and provides support for the exterior left side cover | ||
| Left rear cover - 'U' shaped cover that mounts on the under-side of the extension for the left scanner hinge | ||
| Right rear cover - 'U' shaped cover that mounts on the under-side of the extension for the right scanner hinge - Covers the scanner interconnection cables | ||
| I/O cover - Rectangular plastic cover with a recessed cutout for the interface connectors - Mounts on the right rear of the printer | ||
| Rear foot - Helps in printer stability when the scanner has been lifted up - Also forms a recess for the alignment peg on the optional paper tray - Mounts on the rear of the printer below the I/O cover | ||
| Left link mount - Rectangular plastic piece that has a recess for the printer-to-scanner link and includes the bottom half of the scanner hinge - Mounts on the upper rear left side of the print mechanism | ||
| Right link mount kit - Includes the 'L' shaped plastic piece that has a recess for the printer-to-scanner link and scanner hinge, and the scanner release lift spring - Mounts on the upper rear right side of the print mechanism | ||
| Right link mount - 'L' shaped plastic piece that has a recess for the printer-to-scanner link and includes the bottom half of the scanner hinge - Mounts on the upper rear right side of the print mechanism | ||
| Upper front cover - Rectangular plastic piece with recess for the printer logo - Mounts to the cartridge access cover assembly | ||
| Face-down paper exit arm - Helps to prevent paper re-entering the printer and paper curl - Mounts on the right side of the top cover output tray | ||
| Right scanner link assembly - Spring loaded arm - Connects between the top of the printer and the bottom of the scanner - Allows for limited tilting of the scanner assembly for toner cartridges and image drum/transfer assembly cartridge access |