HP LaserJet 3380
All-In-One Printer
External Covers Diagram
External Covers Diagram
| REF | DESCRIPTION | |
|---|---|---|
| M4 truss head (flanged) Phillips/hex combo drive screw - 12mm long - (S1) Used to secure the top cover to the print engine frame | ||
| M3 truss head (Flanged) Phillips screw (Black oxide finish) - 6mm long - (S6) Typically used to secure plastic parts and the support pan to the metal side plates | ||
| Left height guide - Plastic channeled strip with locking tab - Mounts in the paper exit slot on the top cover | ||
| Right height guide - Plastic channeled strip with locking tab - Mounts in the paper exit slot on the top cover | ||
| Top cover assembly - Has face-down paper output tray molded into it - Mounts to top of printer - Provides mounting support for the scanner assembly | ||
| Right side cover assembly - Has molded-in air intake louvers | ||
| Toner cartridge door - Fold down door used when accessing the toner cartridge - Mounts to the top of the front cover | ||
| Front cover - Lower front of printer - With opening for inserting the paper input tray assembly | ||
| Support frame - Curved plastic support piece - Mounts on the bottom left side of the printer (below the left side door) | ||
| Left side door assembly - Provides access to connect the printer interface cables - Includes door and hinge | ||
| Rear cover assembly - Includes rear cover and fold down face-up (or straight through) paper output tray (tray is NOT sold separately) | ||
| 12 | 7121-8043 |
HP Jewel |
| 13 | XA9-1504 | M3 truss head (flanged) screw - 8mm long |
| 14 | RB9-0819 | M4x10 truss head screw |