HP LaserJet 3380 All-In-One Printer
Internal Components (2 of 2) Diagram

M4 screw - RB9-0819 Screw - RB9-0818 M3 screw - XA9-1504 Left side fuser bracket - RA0-1446 Fusing assembly - RM1-0999 Left plate assembly - RM1-0836 Front guide assembly - RA0-1451 Right side plate assembly - RM1-0835 Solenoid - RK2-0064 Connecting link - RA0-1457 Solenoid - RK2-0064 Connecting link - RA0-1457 Fan assembly - RM1-0846 Gear - RA0-1176 Gear - RA0-1088 Right side fuser bracket - RA0-1447 M3 screw - XA9-1503 M3 Wafer head machine screw - XA9-1495 M3 Wafer head machine screw - XA9-1495 M3 Wafer head machine screw - XA9-1495 M3 Wafer head machine screw - XA9-1495
REF PART # DESCRIPTION
1 XA9-1495 Wafer head (flanged) machine screw - M3, 6mm long - (S5) Used internally to secure brackets, plates, the pickup solenoid, and the drive motor to the left and right side plates
2 XA9-1503 M3 truss head (Flanged) Phillips screw (Black oxide finish) - 6mm long - (S6) Typically used to secure plastic parts and the support pan to the metal side plates
3 RA0-1447 Right side fuser bracket (L-shaped)
4 RA0-1088 29 tooth gear - Mounts on the end of the pressure roller - Largest of the three gears on the fusing assembly
5 RA0-1176 69 tooth gear - Large gear with ribs and six small holes - Mounts on on a rod in the upper rear corner of the right side plate
6 RM1-0846 Fan Assembly - Includes the tube axial fan and the plastic mounting bracket/airflow guide - Mounts to the right side plate assembly
7 RA0-1457 Connecting link - Connects between the sliding linkage on the left and right side plates and the toner cartridge access door (two used)
8 RK2-0064 24VDC Solenoid - Engages the pickup roller gear/clutch assembly - Mounts on the right side plate assembly
9 RM1-0835 Right side plate assembly - Includes the right side plate, drive motor, most all drive gears, and cam levers - Does not come with the pickup roller solenoid or 69 tooth gear - Right side of the internal printer mechanism
10 RA0-1451 Front guide assembly - Ribbed plastic piece that runs the width of the printer - Mounts to the front of the left and right side plates
11 RM1-0836 Left plate assembly - Left side of internal printer mechanism - The printer formatter board mounts to this plate
12 RM1-0999 Fusing assembly - Bonds toner to paper with heat - For 100V to 127VAC operation - Mounts in the upper rear of the printer
RM1-2076 Fusing assembly - Bonds toner to paper with heat - For 220V to 240VAC operation - Mounts in the upper rear of the printer
13 RA0-1446 Left side fuser bracket (L-shaped)
14 XA9-1504 M3 truss head (flanged) screw - 8mm long
15 RB9-0818 M3 Screw with washer - 6mm long
16 RB9-0819 Screw
For more information about the parts listed above go to  www.PrinterSupplies.com