HP LaserJet 3380
All-In-One Printer
Paper Pickup Assembly (2 of 2) Diagram
Paper Pickup Assembly (2 of 2) Diagram
| REF | DESCRIPTION | |
|---|---|---|
| M3x6 TP screw - (S12) Used to secure the plastic brackets on each side of the paper pickup roller to the metal plate | ||
| M4x14 screw - (S4) Used in the paper pickup assembly and the fusing assembly (typically to secure plastic to plastic parts) | ||
| Paper pickup assembly - Includes the pickup roller, paper feed roller assembly, separation pad, plastic housing and other associated parts - Mounts in the bottom rear of the printer | ||
| Paper lift plate assembly - Plastic plate assembly that includes the two blue paper width adjusters - Mounts to the front of the paper pickup assembly | ||
| Rubber foot - For bottom of printer - Three used | ||
| Sub-pad arm - Small curved plastic arm - Help keeps remainder of paper stack in place while the top sheet is picked - Mounts on each side of the separation pad assembly in the paper pickup assembly (two used) | ||
| 7 | RF0-1014 | Separation pad assembly |
| 8 | RB9-0819 | M4 x 10 Screw |
| 9 | RB9-0820 | M3 x 8 Screw |