HP LaserJet 2300 Paper Jam Kit / Roller Kit (GENERIC)

Keep your LaserJet 2300 printer in good health! Maintenance kits are essential for keeping your printer in working condition. However, if your fuser is still good, a LaserJet 2300 Paper Jam Kit is a cost effective solution. Rollers tend to wear out at the same rate, often before the fuser needs replacing. 

Hewlett Packard LaserJet 2300 Feed Kit  | Paper Jam Kit (GENERIC rollers)

	HP LaserJet 2300 Tray 1 separation pad - Does not include holder p/n RM1-0739	Qty 1
	HP LaserJet 2300 Pickup roller - MP/Tray 1 pickup roller	Qty 1
	HP LaserJet 2300 Pickup roller assembly, rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers	Qty 1
	HP LaserJet 2300 Separation pad assembly in front portion of 250 sheet tray 2	Qty 1

Please note, roller kits don't solve every paper jam issue.

	Manufacturer: PrinterSupplies.com Unit of measure: EA Type: HP Laserjet Paper Jam Kit | Roller Kit Print Type: HP LaserJet Printer Parts HP LaserJet 2300 Paper Jam Kit | Roller Kit (GENERIC) (click on product for more details)	$29.00 Quantity:

How hard is it?

Download HP 2300 Maintenance Kit Instructions

To keep paper jam cost down, this Kit DOES NOT include Transfer Roller Assembly RM1-0338

RM1-0343

Manufacturer: Hewlett Packard Unit of measure: EA Type: 2300 Print Type: LaserJet Printer Parts HP LaserJet 2300 Transfer roller assembly - Includes left side bushing (RM1-0338)

Qty

Not everyone has added added on paper trays, however if you do, you will need to purchase additional rollers for your add on tray

RC1-0954

	Manufacturer: Hewlett Packard Unit of measure: EA Type: 2300 Print Type: HP LaserJet Printer Parts HP LaserJet 2300 Separation pad assembly in front portion of 250 sheet tray 2	Qty

RB2-6304

Manufacturer: Hewlett Packard Unit of measure: EA Type: 2000/2200 Print Type: LaserJet Printer Parts HP LaserJet 2300, Pickup roller assembly, rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers

Qty

HP LaserJet 2300 Printer Issues

14.x Feed Roller Error | Possible printer control panel error messages

14.2 FEED ROLLER ERROR

14.3 FEED ROLLER ERROR

The rollers in tray x have worn out. x is the number of the tray, where 2 = Tray 2 and 3 = Tray 3. Replace the rollers.

Solving 41.3 Unexpected Size in Tray XX error 

Double-check both the page size specified in the application, the paper size set for the tray, and the paper in the tray. These three areas should match. (ANY/ANY works for tray size setting for all sizes).

Typical jam causes

Occasionally, media can become jammed during a print job. The following are some of the causes:

Trays are loaded improperly or overfilled causing paper to jam
Tray 2 or Tray 3 is removed during a print job causing paper to get stuck in the printer
The top cover is opened during a print job

Common Issues

Pick-up rollers wear out - causing repeated paper jams
Separation rollers wear out - causing multiple sheets to feed at the same time
Transfer rollers wear out - causing poor print quality

Paper not picking up

Maintenance kits are available for LJ 2300, however, it may not be time yet.  Fuser's for this printer last longer than the rollers.  If you have a screw driver & needle nose pliers and feel like you tackle this project, buy a LaserJet 2300 feed roller kit, otherwise known as a paper jam kits and do it yourself.  

PrinterSupplies.com
Printer, Copier, Fax Supplies & Parts, since 1992
1625 Precinct Line Road, Suite 100, Hurst, TX 76054
©2005 PrinterSupplies.com. All Rights Reserved.